MCC Advanced Moldings Co., Ltd. is a company that can provide innovative products with imagination and suggestion.

Coating (painting / sputtering)

We possess various coating methods, and it is possible to achieve beautiful finish by selecting the most suitable method for your product.

【Coating method】
・ Painting
　（Two-component curable paint , Conductive paint , Anti glare paint）
・ UV coating
・ Inner mirror painting
・ sputtering

---

UV coating

It is a coating method that uses a paint (UV hard coat paint) that is cured by UV irradiation。

■It has high gloss and mirror finish.
■Excellent heat resistance.It does not burn even if the fire of the cigarette is pressed
■Wear resistance, chemical resistance, solvent resistance, etc. are much better than ordinary paint.

---

【Process】

---

---

Inner mirror painting

It is a painting technology that achieves a mirror-like appearance by painting fine powder metal paint on the back of a transparent resin.

■A mirror-like appearance can be given to cylindrical inner standing walls such as caps, which are difficult to coat in vapor deposition.
(Please refer to Figure 1)
■The process can be shortened compared to evaporation.
(Please refer to Figure 2)

---

【Figure 1】

【Figure 2】

---

sputtering

A method of laminating metal on the product surface by magnetron sputtering to give a metallic appearance

■In addition to Al, Ni and Cr, high melting point materials such as molybdenum and tungsten, alloys, and oxides can be used because plasma-excited argon is used.

■Metal layers can be formed at a higher density than vapor deposition.Film thickness control is easy and possible.

---

【Process】

---